Connections

Notes on connections

Turn off the power supply for all components before making any connections.

If the cables necessary for connecting a component to the system are not included with the component or available as an option, you may need to fashion a cable to suit the component concerned.

Read the instruction manual for each system component carefully before connecting it.

Connecting the RF in Terminal

CAUTION

Overtightening “Nut type” RF coaxial cables may damage jacks. Finger tighten only.

„Antenna Connection

Connect the cable from Antenna to the VHF/UHF terminal on the unit.

„Cable Connection

Connect the cable supplied by your local cable company to VHF/UHF terminal on the unit.

VHF UHF

Antenna Antenna

Mixer

Cable Box

 

In from CABLE

Or

Note to CABLE system installer:

This reminder is provided to call the CABLE (Cable TV) System Installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

12

 

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Page 12
Image 12
Panasonic PV DR2714 manual Connections, Connecting the RF in Terminal, „ Antenna Connection, „ Cable Connection