Panasonic PV DR2714 Transfer Dubbing from Tape, One Touch Dubbing Tape, Preparation VCR side

Transfer (Dubbing) from Tape

		VCR
		DVD
		INPUT
		CH Ÿź
	NUMBER
	keys
	STOP	PAUSE
		PLAY
		DVD
		DVD REC
		REC MODE
		AUDIO
One Touch Dubbing (Tape		DVD)
RAM	DVD-R

You can transfer (dubbing) programs recorded on a tape onto a disc*1 with one stroke of the button. In One-Touch Dubbing, programs are automatically dubbed onto the disc from the playback location on the tape. If you want to transfer (dubbing) from the desired point, see “Manual Dubbing” on next page.

*1 Only DVD-RAM and non-finalized DVD-R discs can be used for transfer (dubbing) from a tape. (see page 7.)

Note:

• Copy protected VHS tapes cannot be dubbed to a disc.

Preparation

VCR side:

• Insert a cassette containing material to be dubbed.

DVD side:

•When using a cartridge style disc, confirm that it is not rewrite prohibited.

•Be sure there is enough space on the disc to accommodate the dubbing.

•Select the recording mode. (XP, SP, LP, or EP).

•Disengage the disc protect setting.

1 With both VCR and DVD in Stop mode, press DVD and hold down for about 3 seconds after the OSD below appears.

PRESS AND HOLD DUBBING

FOR 3 SEC TO START

2 Tape rewinds to the beginning automatically.

3 Dubbing begins. Information is displayed on the screen and sub display.

DUBBING

VCRȲDVD

EP XP

Sub Display

Dubbing stops automatically when tape playback is finished or at disc end.

„To end dubbing

Press STOP.

•When playback (source) side ends and unit enters Stop mode, or, if dubbing is stopped due to an error, a message will briefly appear.

„Only the following operations are allowed while transferring (dubbing)

•Stopping transfer (dubbing) by pressing STOP.

•Changing channels.

-During dubbing, you can select and watch TV stations using NUMBER keys and Channel Ÿź keys. To switch back to the dubbing picture, press DVD or VCR. If it is the dubbing picture, CH is not displayed.

•Selecting input mode by pressing INPUT.

•Turning unit ON/OFF by pressing POWER. (Dubbing will continue even if power is turned off.)

•Changing audio mode by pressing AUDIO.

Notes:

•While One Touch Transfer (Dubbing) is activated, timer recording cannot be started.

•When the transfer (dubbing) is not started or not executed, the “DUBBING” indicator blinks for about 7 seconds. Check if the unit is properly prepared.

72
	For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo