Panasonic PV DR2714 manual TV Operation

TV Operation

INPUT
RAPID	MUTE
TUNE
NUMBER	CHŸź
keys
	VOL+/-
	100 key
	ACTION
SELECT
ŸźŻŹ/	RETURN
SET
AV Input Terminal 2

Selecting Input Mode

„Method 1:

Press CH Ÿź. The display will change as follows.

(TV)	LINE2
CH2
(CABLE)
CH1
(TV)
CH69
(CABLE)	LINE1
CH125

Notes:

•The diagram at right is an example.

•TV CH 2 and CABLE CH 1 represent the lowest channels in memory, while TV CH 69 and CABLE CH 125 represent the highest channels in memory.

„Method 2:

Press INPUT. The display will change as follows.

LINE1 LINE2 TUNER

LINE 1:

Signal of source connected to AV Input terminal 1 is displayed. (Rear of the unit.)

LINE 2:

Signal of source connected to AV Input terminal 2 is displayed.

TUNER:

Signal of source connected to VHF/UHF terminal is displayed.

Using the CH/VOL Button

„Select desired channel:

Press CH Ÿź or NUMBER keys.

„Adjust desired volume level:

Press VOL + or VOL -.

Using the Number and 100 keys

When selecting CABLE channels 100 to 125 with the NUMBER keys, first press the 100 key, and then enter the remaining two digits.

Example 1:

To select channel 125, first press the 100 key, then 2, then 5.

Example 2:

To select channel 12, first press the 1 key, then 2.

Example 3:

To select channel 2, first press the 0 key, then 2.

Rapid Tune

Press R-TUNE to display the last channel you were watching.

Audio Mute

Press MUTE to instantly mute the sound. Press again to restore the previous sound level.

20
	For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo