Panasonic PV DR2714 manual Transfer Dubbing from DVD, One Touch Dubbing DVD Tape, „ To end dubbing

Transfer (Dubbing) from DVD

	VCR
	DVD
	INPUT
	CH Ÿź
NUMBER
keys
STOP	PAUSE
	PLAY
VCR
VCR REC
SPEED	AUDIO
One Touch Dubbing (DVD	Tape)

You can transfer (dubbing) programs recorded on a disc*1 onto a tape with one stroke of the button.

In One-Touch Dubbing, all contents on the disc are automatically dubbed onto the tapes. If you want to transfer (dubbing) from the desired point, see “Manual Dubbing” on next page.

*1 Available discs for transfer (dubbing) onto tape are DVD-RAM and DVD-R. Most DVD videos cannot be dubbed because they are copy-guarded.

Preparation

DVD side:

• Insert a disc containing programs to be dubbed.

VHS side:

•Insert a cassette with record tab intact.

•Recording will be done from tape beginning. Check tape contents carefully as all existing recordings will be completely dubbed over.

•Select the recording mode. (SP or EP).

1 With both VCR and DVD in Stop mode, hold down VCR for about 3 seconds after OSD below is displayed.

PRESS AND HOLD DUBBING

FOR 3 SEC TO START

2 Dubbing begins. Information is displayed on the screen and sub display.

DUBBING

VCRȰDVD

EP XP

Sub Display

Dubbing stops automatically when disc playback is finished or at tape end.

„To end dubbing

Press STOP.

•When playback (source) side ends and unit enters Stop mode, or, if dubbing is stopped due to an error, a message will briefly appear.

„Only the following operations are allowed while transferring (dubbing):

•Stopping transfer (dubbing) by pressing STOP.

•Changing channels.

-During dubbing, you can select and watch TV stations using NUMBER keys and Channel Ÿź keys. To switch back to the dubbing picture, press DVD or VCR. If it is the dubbing picture, CH is not displayed.

•Selecting input mode by pressing INPUT.

•Turning unit ON/OFF by pressing POWER. (Dubbing will continue even if power is turned off.)

•Changing audio mode by pressing AUDIO.

Notes:

•While One Touch Transfer (Dubbing) is activated, timer recording cannot be started.

•When the transfer (dubbing) is not started or not executed, the “DUBBING” indicator blinks for about 7 seconds. Check if the unit is properly prepared.

70
	For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo