73 74 71 72

71 TAPE CD

72

73

DECK

74

Recording CDs

ALL-REC

Records the whole CD or selected tracks. When the tape finishes before CD, recording and CD pauses for you to resume recording on the opposite side.

Preparation: Insert a CD (\ page 10).

Press [n TAPE/CD] to switch to CD mode.

Press [CD REC MODE] to display “ALL-REC”.

Each time you press the button:

ALL-REC1-REC OFF

The display shows the tape length needed.

“C – – – –” indicates the tape needed exceeds 100 minutes. You can still record, but some tracks may not be recorded if the tape isn’t long enough.

up.Load a cassette with the side for recording facing

 

 

Press [ [/ ] to start recording. K

 

Recording

To stop recording

The unit rewinds the tape, records 10 seconds of silence, and

 

then starts recording.

 

 

 

 

Press [n TAPE/CD]. The CD also stops.

 

If a track is interrupted at the end of the side facing up

 

Recording and CD pauses.

 

To record the track again on the opposite side

 

1.Press [0 DECK], flip the cassette, and insert it.

2.Press [ [/ ]. K

The unit records 10-second of silence, and resumes recording from the beginning of the cut-off track.

To record selected tracks

1Program tracks (\ page 12).

2Do steps . to ..

Note

You cannot use ALL-REC with random play and repeat play (\ page

11).

15

RQT5189

Page 15
Image 15
Panasonic RX-ES20 operating instructions Recording CDs, If a track is interrupted at the end of the side facing up