Setting the Clock, Displaying the clock | Panasonic RX-ES20 specification

Setting the Clock

This is a twenty-four hour clock.

The example shows how to set the clock to 13:30.

■Press [ /I ] to tu n the unit on.

■Press [CLOCK/TIMER] to select “CLOCK”.

Each time you press the button:

CLOCK	ON	rPLAY	rPLAY OFF
Original display		rREC OFF	ON rREC

■Within 10 seconds

Turn [TIME/PRESET TUNE CD SKIP] to set the time.

■Press [CLOCK/TIMER] to start the clock.

The original display is restored shortly after.

When batteries are used

The unit cannot be turned on with the remote control.

Remote control only

Press [DISPLAY].

Plug type: 3.5 mm stereo

Note

Avoid listening for prolonged periods of time to prevent hearing dam- age.

RQT5189

Image 7

Contents

RX-ES20 Table of Contents Dear Customer PrecautionsSupplied Accessories Fuse Ampere Before use Use of Batteries Power SourcesOperating the unit on AC power Using batteries not included Cassette deck controls Location of ControlsBasic controls Tuner/CD controls Buttons Remote ControlUse Using Headphones not included Setting the ClockDisplaying the clock If noise is excessive in FM Normal tuningUsing auto scan Radio Radio Preset tuningPresetting radio stations Using preset scan CD selection CDs Repeat play Direct access playCDs Other modes of play Program play Listening To display the tape counter while recording CassettesTips on Recording Cassette tape care Erasure prevention Recording CDsTips on Recording Normal recording If a track is interrupted at the end of the side facing up Recording CDsPress 0 DECK, flip the cassette, and insert it Press / . K Recording Recording the RadioREC Sound Quality and Sound Field Press Preset EQ to select a settingSound Quality Sound with the Sound Virtualizer Timer Play and Record Timer For a cleaner crisper sound Sleep TimerTimer Fader Maintenance Technical Specifications Troubleshooting