Panasonic RX-ES20 Radio, Preset tuning, Presetting radio stations, Selecting channels

A 72 71 •72

		SLEEP	TIMER FADER DISPLAY
	1	2	3	PGM/-CLEAR	71
72	4	5	6	≥ 10
	7	8	9	0

71 72

7B

Preset channel

7C	PRESET EQ	TAPE TUNER		CD	TUNER
	S.VIRTUALIZER	REW		FF
	AUTO SCAN		+		771 2
	–
		PRESET TUNE			•
		CD SKIP
		VOLUME
71	PRESET TUNE				Indicates preset scan
	CD SKIP

72	PRESET TUNE
	CD SKIP

The Radio

(when using batteries) Press [ /I ].

Preset tuning

Tuning is simpler if you preset stations.

You can preset 12 FM and 12 AM stations.

A Presetting radio stations

Preparation: Tune to the station you want to preset. (\ page 8)

■Press [•MEMORY*CLEAR].

■ While “ ” is flashing

Turn [TIME/PRESET TUNE CD SKIP ] to select a channel and press [•MEMORY*CLEAR].

On the remote control		Listening
Press the numbered button(s) to enter the station into a
channel (1 to 12).
To enter channel 10, 11 or 12
Press [≥ 10], then the two digits.
If “	” goes off during presetting, return to step ■.

Selecting channels

Preparation: Press [TUNER BAND] to select “FM” or “AM”.

■ Turn [TIME/PRESET TUNE CD SKIP ] to select the channel.

On the remote control

Press the numbered button(s) to select the channel (1 to 12). To select channel 10, 11 or 12, press [≥ 10], then the two digits.

C Using preset scan

You can search for a station by listening to all preset channels for 8 seconds each.

Remote control only

Preparation: Press [TUNER] to select “FM” or “AM”.

■Press and hold [ S/ 4 ] or [ 3 / T] until “PS” appears on the display.

Preset scan starts.

■Press [ S/ 4 ] or [ 3 / T] when you find the desired channel.

Preset scan ends after searching through each preset channel once. To stop during the process, press [S/ 4] or [3 / T].

Cancelling a preset channel

e.g.1If channel 3 is not needed

2Select channel 3.

3Press [•MEMORY – CLEAR].

While “ ” is flashing

4Turn [TIME/PRESET TUNE CD SKIP] to display “– –”. Press [•MEMORY – CLEAR].

Now, when you perform preset scan or turn [TIME/PRESET TUNE CD SKIP] to select a preset channel, channel 3 is skipped.

Hints

•To select the cancelled channel, press the remote control’s num- bered buttons.

•You can press [S/ 4] or [3 / T] on the remote control for turning of [TIME/PRESET TUNE CD SKIP ] described above.

9

RQT5189