Getting started
13
VQT2W23
ASpeaker cable sticker (supplied)
BConnector
Be sure to match the number on each sticker with the
connector colour.
≥Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the speakers.
≥Don’t use a front speaker as a surround speaker or vice versa. Verify the type of speaker with the label on the rear of the speaker before
connecting the appropriate cable.
≥To avoid injury by falling or dropping the speaker, place the speaker cables with care not to stumble or hook.
≥Do not hold the speaker in one hand to avoid injury by dropping the speaker when carrying.
[BTT755]

∫Preventing the speakers from falling

≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that
may not have strong enough support. Improper attachment may result in damage to the wall or speakers.
≥Use a string of less than ‰ 2.0 mm, which is capable of supporting over 10kg.
AString (not supplied)
Thread from the wall to the speaker and tie tightly.
BRear of the speaker
CScrew eye (not supplied)
DWall
EApprox.150 mm
Preparing cables and making connection
Speaker cable sticker Colour
1FRONT (L) WHITE
2FRONT (R) RED
3SURROUND (L) BLUE
4SURROUND (R) GREY
5CENTRE GREEN
6SUBWOOFER PURPLE
FRONT
Lch
1
Use of the speaker cable stickers is convenient
when making cable connections.
e.g. Front speaker (L)
2
Push!
r: White
s: Blue line
Connecting the speaker cables. Insert the wire fully,
taking care not to insert beyond the wire insulation.
e.g. Surround speaker [BTT350]

SCBTT755_350EBGN_VQT2W23.book 13 ページ ２０１０年７月８日　木曜日　午後６時５３分