Listening/confirming the preset channels
1 Press [RADIO] to select “FM”.
2 Press the number buttons to select the channel.
To select a
To select a
Alternatively, press [W, X] or [2, 1].
RDS broadcasting
[For[the[United[Kingdom[and[Republic[of[Ireland[
If the station you are listening to is transmitting RDS signals, “RDS” will light up on the display.
While listening to the radio broadcast
Press [DISPLAY] to display the text data.
PS: Programme service
PTY: Programme type
OFF: Frequency display
PTY displays
NEWS | VARIED | FINANCE | COUNTRY |
|
|
|
|
AFFAIRS | POP M | CHILDREN | NATIONAL |
|
|
|
|
INFO | ROCK M | SOCIAL A | OLDIES |
|
|
|
|
SPORT | M.O.R. M* | RELIGION | FOLK M |
|
|
|
|
EDUCATE | LIGHT M | PHONE IN | DOCUMENT |
|
|
|
|
DRAMA | CLASSICS | TRAVEL | TEST |
|
|
|
|
CULTURE | OTHER M | LEISURE | ALARM |
|
|
|
|
SCIENCE | WEATHER | JAZZ |
|
|
|
|
|
* M.O.R. M=Middle of the road music
∫Display on the main unit
TUNED/STEREO:
Displayed when receiving stereo broadcasting
TUNED:
Displayed when receiving monaural broadcasting or monaural sound is selected.
∫If noise is excessive
Press [AUDIO] to display “MONO”.
The sound becomes monaural.
Press the button again to cancel the mode. “AUTO STEREO” will be displayed on the main unit. Depending on the broadcast system, stereo or monaural will be selected. “MONO” is also cancelled when you change the frequency.
≥This setting can be preset for each broadcasting station.
VQT2W23
Enjoying TV with unit’s speakers
Preparation
Turn on your TV and select the appropriate audio input mode [AUX, ARC,
Surround sound effects
You can enhance stereo sources with surround sound effect.
1 Press [SURROUND] several times to select the effect.
2 While “MANUAL” is displayed on the unit’s display
Press [2, 1] and select the desired effect.
Surround modes to enjoy TV audio or stereo sources from all speakers:
≥DOLBY PRO LOGIC II MOVIE
≥DOLBY PRO LOGIC II MUSIC
≥SUPER SURROUND
For more detailed information on this operation, please refer to the “Enjoying surround sound effects” section on page 26.
Sound modes
You can adjust the mode depending on the source or situation.
1 Press [SOUND] several times to select the mode.
2 While the selected mode is displayed on the unit’s display
Press [2, 1] and select the desired setting.
For more detailed information on this operation, please refer to the “Changing the sound modes” section on page 26.
Selecting the type of audio from the DIGITAL AUDIO IN terminal
1 Press
2 Press [AUDIO] several times to select the type.
M1
M2
M1rM2 (stereo audio)
(Only works with Dolby Dual Mono)
≥“M1” or “M2” is not available if “On” is selected in “Digital Audio Input”. (> 40)
≥Audio that is input through the DIGITAL AUDIO IN or AUX terminals are not
output from the HDMI AV OUT terminal.
32
