42
VQT2W23
TV System
Change the setting to match the equipment you are connecting
with.
≥When NTSC contents are played, they are outputted in the
signal format specified in the “NTSC Contents Output”,
irrespective of the settings here.
Network Easy Setting (>22)
Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
LAN Connection Mode
Select connection method.
Access Point Connection Setting
This allows the Wireless router (Access point) and
connection settings to be set and the current connection
settings and connection state to be checked when a
wireless connection is used.
Connection Setting
The Wireless router (Access point) connection wizard
will be displayed.
IP Address / DNS Settings
This is for checking the state of the network connection
and setting the IP address and DNS-related.
Press [OK] to show the respective setting.
≥“Connection Speed Setting” is enabled only when
“Connection Speed Auto-Config” is turned “Off”.
Proxy Server Settings
This is for checking the state of connection with the Proxy
server and performing settings.
Press [OK] to show the respective setting.
Internet Content Settings (>36) (VIERA CAST)
Press [OK] to show the following settings:
Lock
You can restrict using VIERA CAST.
≥Follow the on-screen instructions. Enter the 4-digit
password with the number buttons when the password
screen is shown.
Audio Auto Gain Control
Volume that is different depending on the contents is
adjusted automatically to the standard volume while
using the VIERA CAST.
≥Depending on contents, this function effect will not
work.
≥Select “Off” when the audio is warped.
Time Zone
By selecting the time zone, it is possible to set the unit’s
time to match your location.
≥Some VIERA CAST contents require the time zone to
be set. Set the time zone if necessary.
Summer Time
≥Select “On” when using Daylight Saving time.
MAC Address
Displays the MAC address of this unit.
Remote Control
Change the remote control code if other Panasonic products
react to this remote control.
Quick Start*
Speed of startup from standby mode is increased.
≥Internal control unit will be powered when it is set to “On” so
compared to when the setting is “Off” the following will occur.
jIdle power consumption will increase. (about the power
consumption >53)
*Depending on the power conserving setting activated on the
TV, this function may have less effect when the unit is
started by the power on link function. (>33)
Easy setup (>21)
You can execute basic settings to optimize your home theatre
system.
Default Settings
This returns all values in the Setup menu and the Playback
menu, except for “Remote Control”, “LAN Connection Mode”,
“Access Point Connection Setting”, “IP Address / DNS
Settings”, “Proxy Server Settings”, “Lock”, “DVD-Video
Ratings” and “BD-Video Ratings” etc. to the default settings.
DivX Registration (>29)
You need this registration code to purchase and play DivX
Video-on-Demand (VOD) content.
System Information
Display firmware version of this unit and wireless LAN module
of optional Wireless LAN Adaptor.
Firmware Update (>23)
Press [OK] to show the following settings.
Automatic Update Check
When this equipment remains connected to the Internet, it
will check for the latest firmware version when it is turned
on and you can update it if necessary.
Update Now
You can update the firmware manually.
NetworkGeneralSCBTT755_350EBGN_VQT2W23.book 42 ページ ２０１０年７月８日 木曜日 午後６時５３分