Panasonic SC-BTT755 Preparing the speakers, Assembling the speakers BTT755, Preparation

STEP 1: Preparing the speakers

Caution

≥The main unit and supplied speakers are to be used only as indicated in this setup. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.

≥Do not attempt to attach these speakers to walls using methods other than those described in this manual.

≥Do not touch the front netted area of the speakers. Hold by the sides.

[BTT755]
∏ 2	Front speakers	∏ 4 Bases	∏ 8 Screws A
∏ 2	Surround speakers	(RYK1610-K1)	(XTN5+10FFJK)
∏ 4	Stands (with cables)	∏ 1 Speaker cable	∏ 4 Screws B
(RYK1609A-K: RED)		(REEX1154-1:	(XYN5+J18FJK)
(RYK1609-K: WHITE)		GREEN)
(RYK1609C-K: GREY)
(RYK1609B-K: BLUE)

[BTT350]

∏ 5 Speaker cables (REEX1152A-1: RED) (REEX1153A-1: WHITE) (REEX1154-1: GREEN) (REEX1155-1: GREY) (REEX1156-1: BLUE)

Assembling the speakers [BTT755]

Caution

≥Do not stand on the base. Be cautious when children are near.

≥When carrying speakers, hold the stand and base parts.

Preparation

≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it.

≥For wall mount, refer to page 44.

≥Keep the screws out of reach of children to prevent swallowing.

1	Back of the base
	Pull the cable
	straight along the
	line and slide into
	the groove.

	Tighten
Screw A	securely.

2

2

Screw B

Leave about 80 mm

Insert the wire fully. r: White s: Blue line Push!

Press into the groove.

Tighten securely.

1

VQT2W23

12