Panasonic SC-HT500 Other speaker setup options, Attaching to a wall, screw with the hole or holes

Models: SC-HT500

1 40
Download 40 pages 7.16 Kb
Page 10
Image 10
Other speaker setup options

Simple setup

Other speaker setup options

Attaching to a wall

[Note]

The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg per screw.

1 [For\the\United\Kingdom]and]Continental\Europe]

Remove the stand before attaching the front and center speakers.

BEFORE REMOVING THE STAND

Take the speaker cable out of the stand’s hole if it is threaded through.

Lay the speaker on a soft cloth.

2 Screw a screw (not included) into the wall.

30–35 mm

Attaching to a wall2 Screw a screw (not included) into the wall.7.5–9.4 mm

8–11 mm

Wall

Unscrew the screw with a Phillips-head screwdriver.

3

Fit the speaker securely onto the

 

 

screw with the hole or holes.

 

Vertical

 

 

 

Horizontal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

100 mm

Stand

Fitting speaker stands (optional)

Preparation

Remove the stand (step 1 above).

Ensure the stands meet these conditions before purchasing them. Observe the diameter and length of the screws and the distance

between screws as shown in the diagram. The stands must be able to support over 10 kg.

The stands must be stable even if the speakers are in a high position.

5 mm

pitch 0.8 mm

60 mm

Notes on speaker use

You can damage your speakers and shorten their useful life if you play sound at high levels over extended periods.

Reduce the volume in the following cases to avoid damage. –When playing distorted sound.

–When the speakers are receiving howling from a record player, noise from FM broadcasts, or continuous signals from an oscillator, test disc, or electronic instrument.

–When adjusting the sound quality. –When turning the unit on or off.

If irregular coloring occurs on your television

 

These speakers are designed to be used close to a television, but

 

the picture may be affected with some televisions and set-up

 

combinations.

 

If this occurs, turn the television off for about 30 minutes.

 

The television’s demagnetizing function should correct the

RQT6835

problem. If it persists, move the speakers further away from the

Caution

Use the speakers only with the recommended system.

Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.

Do not attempt to attach these speakers to walls using methods other than those described in this manual.

10

television.

Page 10
Image 10
Panasonic SC-HT500 Other speaker setup options, Attaching to a wall, Screw a screw not included into the wall