Panasonic SC-PM18 Radio manual tuning, Listening

3

	SLEEP	CLOCK	PLAY
	AUTO OFF	TIMER	REC
	DISC
	1	2	3
	4	5	6
2	7	8	9
	CD
	PLAY MODE
	PGM	0	10
	CLEAR
	TUNER/		TAPE
	BAND
	AUX

VOL VOL

MUTING	REW	FF
S.SOUND EQ PRESET EQ	DISPLAY	DIMMER

operations	1	TUNER BAND
	2 PLAY MODE
Listening

3 FF

REW

4 VOLUME

DOWN UP

A

SLEEP	CLOCK	PLAY
AUTO OFF	TIMER	REC
DISC
1	2	3
4	5	6
7	8	9
PLAY MODE
PGM	0	10
CD		PLAY MODE
CLEAR		TAPE
TUNER/
BAND
AUX

VOL VOL

MUTING	REW	FF
S.SOUND EQ PRESET EQ	DISPLAY	DIMMER

10

1

4

The radio: manual tuning

1 Press [TUNER/BAND] to select “FM” or “AM”.

The unit comes on automatically.

Every time you press the button:

FM ↔ AM

2 Press [PLAY MODE] on the remote control to select “MANUAL”.

Every time you press the button:

MANUAL ↔ PRESET

3 Press [g 4/REW] or [f 3 /FF] to select the frequency of the required station.

“ST” is displayed when a stereo FM broadcast is being received.

4 Adjust the volume.

Auto tuning

Press and hold [g4/REW ] or [ f3/FF] for a moment until the frequency starts changing rapidly. The unit begins auto tuning, stopping when it finds a station.

•Auto tuning may not function when there is excessive interference.

•To cancel auto tuning, press [g4/REW] or [f3/FF] once again.

AIf noise is excessive in FM

By remote control only

Press and hold [PLAY MODE] to display “MONO”.

This mode improves sound quality if reception is weak, but broadcasts will be heard in monaural.

Press and hold [PLAY MODE] again to cancel the mode. “MONO” goes out. MONO is also cancelled if the frequency is changed.

Turn off “MONO” for normal listening. Stereo and monaural broadcasts are automatically played as they are received.

FM allocation setting

By main unit only

By adjusting the allocation, you can enable this tuner to receive FM broadcasts allocated in 0.1 MHz steps.

Press and hold [TUNER/BAND]. After a few seconds, the display will change to a flashing display of the current mini- mum FM frequency. If you continue to hold the button down, the minimum frequency will change. Release the button at this time.

To return to the original frequency indication, repeat above.

Note

•After changing the “allocation” setting, the frequencies you previously preset in the memory will be cleared.

•Sound is momentarily interrupted if you load/unload a cassette while listening to an AM broadcast.

RQT6683