Panasonic SC-PM18 manual Program play, Press CD 2/ J and then L Clear Press PGM Press Disc

SLEEP	CLOCK	PLAY
AUTO OFF	TIMER	REC

3	DISC			4
	1	2	3
	4	5	6	5
	7	8	9
2	PLAY MODE
	PGM	0	10	1 7
	CD
	CLEAR		TAPE
1	TUNER/
	BAND
	AUX

VOL VOL

MUTING	REW	FF	/REW,
S.SOUND EQ PRESET EQ DISPLAY		DIMMER	/FF

	1	CLEAR
		CD
operations	2	PGM
Listening	3	DISC

4 1 2 3

4 5

5 1 2 3

4 5 6

7 8 9

010

Specified track

number

Program order

7 CD

A

B Indicates program mode

16

CDs

Program play

By remote control only

This function allows you to program up to 24 tracks.

1 Press [CD 2/ J] and then [L CLEAR]. 2 Press [PGM].

3 Press [DISC].

4 (within 10 seconds or so)

Press [1] – [5] to select the disc you want.

5 Press the numeric button(s) to select the track you want to play in the desired sequence.

6 Repeat steps 3 through 5 until you have programmed all the tracks you want.

7 Press [CD 2/ J].

Play will start in the programmed sequence.

To cancel program play mode

Press [PGM] in the stop mode.

Programmed contents will be saved in memory.

To clear all programmed tracks

Press [L CLEAR] in the stop mode. “CLEAR” is displayed.

To select a two-digit track

Press [ 10] and then the two numbers you want.

AWhen “CD FULL” appears

The number of programmed tracks is limited to 24. No further tracks can be programmed.

BYou can do the following during program mode:

• Check program contents.

Press [g4/REW] or [f3/FF].

Every time you press one of the buttons, the track and program No. are shown on the display.

•Add to the program. Repeat steps 3 through 5.

Memory retention

Your program is retained in memory for about 1 week while the system is unplugged.

To replay your program

If you turned OFF your program with [PGM], you can play it again as explained below.

1.Press [PGM].

2.Press [CD 2/ J].

If you program a track not on your CDs

The track is initially programmed, but during program play, the player will skip that track and will continue playing from the next programmed item.

Note

•During program play, you can search forward or backward only within the current track.

•During program play, skipping is always in the programmed order, whether forward or backward.

RQT6683