Listening operations
1
3 | 2 | 5 | |
4 | |||
|
|
1
POWER
2 TUNER/BAND
MHz
3 TUNE MODE
4 4/REW/g 3/FF/f
TUNED ST | MHz |
5 VOLUME
DOWN |
|
|
| UP |
| dB |
A |
|
|
| TUNE MODE |
| |
| AUTO OFF SLEEP | CLOCK |
|
|
| |
| TIMER |
|
|
| ||
1 | 2 | 3 | PLAY |
|
|
|
REC |
|
|
| |||
4 | 5 | 6 | 10 |
|
|
|
7 | 8 | 9 | 0 |
|
|
|
TUNE MODE PROGRAM CANCEL | PLAY MODE | TUNED | MONO | MHz | ||
|
|
|
| |||
SELECTOR TUNER TAPE | CD |
|
|
| ||
| CLEAR | REW | FF |
|
|
|
| The radio: manual tuning | ||
1 | Press [POWER |
| ] to turn the unit on. |
| |||
2 | Press [TUNER/BAND] to select “FM” | ||
| or “AM”. | ||
Every time you press the button:
FM WAM
3 Press [TUNE MODE] on the remote control to select “MANUAL”.
Every time you press the button:
MANUAL WPRESET
4 Press [4/REW/ g] or [3/FF/ f] to select the frequency of the required station.
“TUNED” is displayed when a radio station is tuned.
“ST” is displayed when a stereo FM broadcast is being received.
5 Adjust the volume.
Auto tuning
Press and hold [4/REW/ g] or [3/FF/ f] for a moment until the frequency starts changing rapidly. The unit begins auto tuning, stopping when it finds a station.
•Auto tuning may not function when there is excessive interference.
•To cancel auto tuning, press [4/REW/ g] or [3/FF/ f] once again.
AIf noise is excessive in FM
by remote control only
Press and hold [TUNE MODE] to display “MONO”.
This mode improves sound quality if reception is weak, but broadcasts will be heard in monaural.
Press and hold [TUNE MODE] again to cancel the mode.
“MONO” goes out. MONO is also canceled if the frequency is changed.
Turn off “MONO” for normal listening. Stereo and monaural broadcasts are automatically played as they are received.
FM allocation setting
Main unit onlyBy adjusting the allocation, you can enable this tuner to receive FM broadcasts allocated in 0.1 MHz steps.
Press and hold [TUNER/BAND]. After a few seconds, the display will change to a flashing display of the current minimum FM frequency. If you continue to hold the button down, the minimum frequency will change. Release the button at this time.
To return to the original frequency indication, repeat above.
Note
•After changing the “allocation” setting, the frequencies you previously preset in the memory will be cleared.
•Sound is momentarily interrupted if you load/unload tapes while listening to an AM broadcast.
RQT5717
