Recording operations
5
1
2 | 3 | 4 |
|
1
| side to be recorded | |||
| facing up |
|
| |
2 REV MODE | TUNED ST MONO | kHz MHz dB | ||
| PRGM AUTO |
|
| |
| 1 - |
| PLAY | |
| RANDOM | REV | REC FWD |
3 SELECTOR |
|
|
|
|
TUNED ST MONO | kHz MHz dB | |||
PRGM AUTO |
|
|
| |
1 - | REV | PLAY | FWD | |
RANDOM | REC |
Recording CDs
Normal recording
•Tracks are recorded in the order in which they are found on the CD.
•Tracks are cut in the middle when the end of the tape is reached.
•You can record from any point on the tape.
1 Insert the cassette with the exposed tape facing left.
Tape direction is automatically set to “ FWD ”
2 Press [REV MODE] on the remote control to select the reverse mode.
Every time you press the button:
: One side is recorded.
,
3 Press [SELECTOR] to select the CD mode.
4 Press [OPEN/CLOSE c] to open the
CD tray.
Insert the CD with label facing upward.
Press [OPEN/CLOSE c] to close the CD tray.5 Press [[REC/ J] to start recording.
•If you selected “” in step 2, the direction will automatically change to “” when recording starts.
•The recording will start from the first track.
To stop recordingPress [STOP L].
The recording and the CD will stop.
To stop recording temporarilyPress [[REC/ J].
To resume recording, press [[REC/ J].
To record on reverse sideBefore recording, press [TAPE 2 ] twice3 and immediately there- after [STOP L].
The tape direction will be shown as “ REV ”.
To record from a specific point on a tapeBefore recording, advance the tape to the point from where you want to start recording.
4 OPEN/CLOSE
TUNED ST MONO | kHz MHz dB | |||
PRGM AUTO |
|
|
| |
1 - | REV | PLAY | FWD | |
RANDOM | REC |
To record programmed tracks
1After step 4, program the track(s) you want (\steps
2 Press [[REC/ J] to start recording.
5REC
TUNED ST MONO | kHz MHz dB | |||
PRGM AUTO |
|
|
| |
1 - | REV | PLAY | FWD | |
RANDOM | REC |
Tape direction
RQT5717