![AM outdoor antenna (not included)](/images/new-backgrounds/11424/1142413x1.webp)
A |
| FM Outdoor antenna |
|
| (not included) |
| 75Ω coaxial |
|
| cable |
|
| (not included) |
|
|
| Shield braid |
| GND | Core wire |
|
| |
B |
|
|
AM outdoor antenna (not included)
5-12m
AM | ANT |
| |
LOOP |
EXT
C |
|
| |
| (L) |
| |
Analog player | (R) | AUX | |
(not included) | |||
| R L | ||
|
| Rear panel of this unit |
Connections
Optional antenna connections
You may need an outdoor antenna if you use this system in a mountainous region or inside a
AFM Outdoor antenna
Disconnect the FM indoor antenna if an FM outdoor antenna is |
| ||
installed. | use | ||
1 | Remove a piece of the outer vinyl insulator. | ||
| |||
2 | Twist the shield braid. | Before | |
3 | Expose the core wire. | ||
|
Note
An outdoor antenna should be installed by a qualified technician only.
BAM outdoor antenna
Connect the outdoor antenna without removing the AM loop antenna. Run 5 to 12 m of
Note
When the unit is not in use, disconnect the outdoor antenna to prevent possible damage that may be caused by lighting. Never use an outdoor antenna during an electrical storm.
External unit connections
•Make sure that the power supply for all components has been turned off before making any connections.
•For details, refer to the operating instructions of the unit which are to be connected.
•All peripheral components and cables sold separately.
CConnecting analog equipment
An analog player with a
7
RQT5717