Specifications
AMPLIFIER SECTION
Power output
1% Total harmonic distortion |
|
30 |
|
(Low channel) 9 W per channel (6Ω) | |
160 |
|
(High channel) 4 W per channel (6Ω) | |
Total | 13 W per channel |
Input sensitivity |
|
AUX | 250 mV |
Input impedance | 47 kΩ |
AUX | |
Output impedance | |
Headphone |
FM TUNER SECTION
Frequency range | |
| |
Sensitivity | 1.8 µV (IHF) |
S/N 26 dB | 1.5 µV |
Antenna terminal(s) | 75Ω (unbalanced) |
AM TUNER SECTION
Frequency range
AM | 520 – 1710 kHz (10 kHz steps) |
Sensitivity |
|
AM |
|
S/N 20 dB (at 999 kHz) | 500 µV/m |
CASSETTE DECK SECTION
| Track system | 4 track, 2 channel |
| Heads |
|
| Record/playback | Solid permalloy head |
| Erasure | Double gap ferrite head |
| Motor | DC servo motor |
| Recording system | AC bias 100 kHz |
| ||
| Erasing system | AC erase 100 kHz |
| Tape speed | 4.8 cm/s |
Reference | Frequency response | 0.18% (WRMS) |
Wow and flutter | ||
| (+3 to |
|
| NORMAL (TYPE I) | 50 Hz – 13 kHz |
| HIGH (TYPE II) | 50 Hz – 13 kHz |
| S/N | 52 dB (A weighted) |
| Fast forward and rewind times | Approx. 120 seconds with |
|
|
CD SECTION
Sampling frequency | 44.1 kHz |
Decoding | 16 bit linear |
Beam source/wave length | Semiconductor laser/780 nm |
Number of channels | Stereo |
Wow and flutter | Below measurable limit |
Digital filter | 8 fs |
D/A converter | MASH (1 bit DAC) |
SPEAKER SECTION
Type | 2 way speaker system |
Speaker(s) |
|
Superwoofer | 10 cm (315/16˝) cone type |
Full range | 8 cm (31/8˝) cone type |
Impedance | High (6Ω), Low (6Ω) |
Input power | High 10 W (Music) |
| Low 35 W (Music) |
Output sound pressure level | 86 dB/W (1.0 m) |
Cross over frequency | 110 Hz |
Frequency range | 55 |
| 75 Hz – 22 kHz |
Dimensions (WxHxD) | 140 x 240 x 213 mm |
| (51/2˝ x 97/16˝ x 83/8˝) |
Mass | 2.3 kg (5.1 lb) |
GENERAL
Power supply | AC 120 V, 60 Hz |
Power consumption | 64 W |
Standby | 0.6 W |
Dimensions (WxHxD) | 180 x 241 x 318 mm |
| (7 3/32˝x 9 1/2˝ x 12 1/2˝) |
Mass | 4.6 kg (10.1 lb) |
Notes:
1.Specifications are subject to change without notice. Mass and dimensions are approximate.
2.Total harmonic distortion is measured by the digital spectrum analyzer.
Maintenance
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
If the surface are extremely dirty, use a soft cloth dipped in a soap-
•Never use alcohol, paint thinner or benzine to clean this unit.
•Before using chemically treated cloth, read the instructions that came with the cloth carefully.
For a cleaner crisper sound
Clean the heads regularly to assure good quality playback and recording.
Use a cleaning tape (not included).
Product Service
Do not attempt to remove the cover(s) or repair the unit yourself. Refer servicing to qualified personnel only.
Product information
For product service, product information or assistance with product operation, refer to the servicenter directory.
In the U.S.A., contact the Panasonic Customer Call Center at
In Canada, contact Panasonic Canada Inc. Customer Care Centre at
RQT5717