Before use
1
2
3
4
To household
AC outlet
1
Adhesive tape
FM indoor antenna
GND
2
|
| T |
AM | AN | |
|
| |
LO | OP | |
|
| T |
| EX |
AM loop antenna
3
L
R
|
|
| Speaker | |
| á | á | » | |
» | Red | |||
| ||||
|
| |||
|
|
| ||
Grey |
|
|
| |
L |
|
| Black | |
|
|
| ||
Blue |
|
|
| |
R |
|
|
| |
|
|
| ||
| (SB |
| ||
Speaker |
|
|
Connections
•Plug the AC power cord into a household AC outlet only after all other connections have been made.
•To prepare the AM loop antenna wire and speaker cords, twist the vinyl cover tip and pull off.
1 Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a position where radio signals are received with the least amount of interference.
Note
For the best reception :
An FM outdoor antenna is recommended (\ page 7.)
2 Connect the AM loop antenna.
After attaching the antenna, turn on the system and tune in a broadcast station. Put the antenna where the reception is best and interference is minimal.
3 Connect the speaker cables.
Connect each end of the speaker cables to the terminal lever of the same color so (+) and
Incorrect connection can damage the unit.
Caution
Use only the supplied speakers
The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound quality will be negatively affected.
Caution
•Use the speakers only with the re- commended system.
Failure to do so may lead to damage to the amplifier and/or the speakers, and may
result in the risk of fire.
Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.
•Do not attach these speakers to walls or ceilings.
4 Connect the AC power cord
Note
The included AC power supply cord is for use with this unit only. Do not use it with other equipment.
RQT5717