
Sound
| No sound. | ¡Check the connections. | |
| Distorted sound. | ¡Turn the volume up. | 13 | 
| 
 | ¡Turn muting off. | 28 | 
| 
 | ¡Switch off the unit, determine and correct the cause, then switch the unit on. | – | 
| 
 | Causes include: | 
 | 
| 
 | 
 | |
| 
 | 
 | |
| 
 | 
 | |
| Humming heard during play. | ¡An AC power supply cord or fluorescent light is near the subwoofer. Keep other | – | 
| 
 | appliances and cords away from the subwoofer. | 
 | 
| 
 | 
 | 
 | 
Picture
| Picture distorted. | ¡Some distortion is normal during SEARCH. | 14 | 
| No picture. | ¡Check the connection. | 11 | 
| 
 | ¡Make sure the television is on. | – | 
| 
 | ¡Ensure the television’s video input setting (e.g., VIDEO 1) is correct. | – | 
| 
 | 
 | 
 | 
| The picture shown on the | ¡Go to Video in the SETUP menus, and change “TV Aspect” to suit your television. | 29 | 
| television is not normal. | ¡Use the television to change the aspect to the correct one. | – | 
| (The sides of the picture are cut | If your television cannot change the aspect when input is progressive, try changing | 23 | 
| off, the picture is stretched | 4:3 Aspect with the  | 
 | 
| horizontally, or black bands | ¡Ensure that the unit is connected directly to the television, and is not connected through a | – | 
| appear at the top and bottom of | video cassette recorder. | 
 | 
| the screen.) | ¡Connect to the component video (480P) input terminals on a television compatible with | 11 | 
| 
 | this unit’s copy guard system. You cannot view progressive video if your television is not | 
 | 
| 
 | compatible. | 
 | 
| 
 | ¡Change the size with the variable zoom function. | 18 | 
| 
 | ¡The images on PAL system  | – | 
| 
 | appear vertically stretched. | 
 | 
| There is ghosting when | ¡Press [PROGRESSIVE OUT] so the indicator goes out. This problem is caused by the | 13 | 
| progressive output is on. | editing method or material used on  | 
 | 
| 
 | interlace output. | 
 | 
| 
 | 
 | 
 | 
| Picture quality is poor. | ¡Check the settings in the  | 23 | 
| 
 | ¡The “U1” settings do not work on the images from PAL system  | 23 | 
| The picture on the television | ¡Mobile telephone chargers can cause some disturbance. | – | 
| disappears or stripes appear on | ¡The location and orientation of the antenna are incorrect. If you are using an indoor | 31 | 
| the screen. | antenna, change to an outdoor antenna. | 
 | 
| 
 | ¡The television antenna wire is too close to the unit. Separate the antenna wire of the | – | 
| 
 | television from the unit. | 
 | 
| 
 | 
 | 
 | 
| Menus not displayed correctly. | ¡Change the zoom ratio to “⋅ 1.00”. | 18 | 
| 
 | ¡With the  | 23 | 
| 
 | to “Normal”. | 
 | 
| 
 | 
 | 
 | 
Listening to the radio
| Noise is heard. | ¡Adjust the position of the FM or AM antenna. | – | 
| “ST” flickers or doesn’t light. | ¡Turn the television off or separate it from the unit. | – | 
| Sound is distorted. | ¡Use an outdoor antenna. | 31 | 
| 
 | 
 | 
 | 
| A beat sound is heard. | ¡Turn the television off or separate it from the unit. | – | 
| A low hum is heard during AM | ¡Separate the antenna from other cables and cords. | – | 
| broadcasts. | ¡Turn the television off or separate it from the unit. | – | 
| 
 | 
 | 
 | 
Reference
RQT6945
37
