Simple setup
STEP 1 Speaker assembly
Preparing the front and surround speakers
The speaker units, stands, and bases for the front and surround speakers are the same. Only the lengths of the cables are different.
4 Speaker units | 4 Stands | 4 Bases | 2 Short cables | 2 Long cables | 8 Screws |
|
|
| (for FRONT L/R) | (for SURROUND L/R) |
|
Simple setup
1 | Stand + Base |
Speaker 
unit
Stand
Base
| Stand |
Approx. |
|
120 mm |
|
\ | |
| |
| Base |
Fit into groove.
Connect the speaker cables.
Confirm screw is securely fastened.
Place into groove.
Position wire in grooves as necessary avoiding knots.
Red
BlackCopper
Silver
2 | Speaker unit + Stand/Base |
|
|
| Connect the |
| Confirm screw is | speaker cables. |
|
| |
| securely fastened. |
|
| Speaker unit |
|
\ |
|
Stand/Base |
|
Fit into groove. | Place into groove. |
¡You can put front and surround speakers on the shelf by connecting a speaker directly to the base.
Preparing the center speaker
1 Short cable | 1 Sheet of speaker | Connect the |
|
| |||
(for CENTER) | feet (4 feet per sheet) | speaker cables. | |
|
| (\ above) | |
|
|
|
|
RQT6945
7
