Simple setup
Simple setup
STEP 2 Positioning
1Attach the stickers to the cables
1 Sheet of | Front (L) | short cable | Surround (L) |
| long cable | ||
|
| ||
|
| ||
|
|
| |
stickers |
|
|
|
| Approx. 50 mm (2") Approx. 50 mm (2") | Surround (R) | |
long cable
Front (R)
short cable |
|
Center | short cable |
|
2Position the speakers
Setup example | 2 | Front (R) |
|
|
| ||
| Main unit | Subwoofer |
|
|
|
| |
|
| 4 | Surround (R) |
| 1 Front (L) |
|
|
|
| 60° |
|
|
| 120° |
|
| 5 Center |
|
|
|
|
| ¡The front and surround speakers are |
|
|
| the same. Use those you have |
|
|
| connected the short cords to as front |
| 3 Surround (L) | speakers and those you have | |
| connected the long cords to as | ||
|
|
| surround speakers. |
|
|
| ¡Place the front, center, and surround |
|
|
| speakers at approximately the same |
|
|
| distance from the seating position. The |
|
|
| angles in the diagram are approximate. |
|
|
|
|
Use only supplied speakers
Using other speakers can damage the unit and sound quality will be negatively affected.
¡Set the speakers up on an even surface to prevent them from falling. Take proper precautions to prevent the speakers from falling if you cannot set them up on an even surface.
¡The speaker nets cannot be removed.
Positioning for best effect
How you set up your speakers can affect the bass and the sound field. Note the following points.
¡Place speakers on flat secure bases.
¡Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick curtain.
Note
Keep your speakers at least 10 mm (13/32") away from the system for proper ventilation.
Center speaker
Vibration caused by the center speaker can disrupt the picture if it is placed directly on the television. Put the center speaker on a rack or shelf.
Subwoofer
Place to the right of the television, on the floor or a sturdy shelf so that it won’t cause vibration.
Leave 10 cm (4") on the right for the woofer to be effective. Leave 10 cm (4") at the rear for ventilation.
RQT6945
8
