29

Installing SD-MovieStage (Cont.)

8Click the [YES] Button.
≥The necessary software for the SD-MovieStage is installed.
9Click [Yes] Button to create the short-cut icon on the
desktop.
10 At the end of the Setup, click on the [Finish] Button.
≥After rebooting the computer, the SD MovieStage is enabled.
≥For the information of the operation of SD-MovieStage, refer to the
instruction in the PDF file that was installed together with this
software. Adobe® Acrobat® Reader® (refer to http://
www.adobe.com/) is required to read PDF files.
≥The screen image inserted into this manual is captured from
English version.
ªCautions for Windows XP/2000 Professional
When installing or using this software, specify the user name to
[Administrator (computer administrator)] or any other user name having
the equivalent right. Then log on with that user name to install this
software.
(If you don't have such a right, consult with your system administrator).

Starting SD-MovieStage

The step below starts the SD-MovieStage. Please read the PDF-based
Instructions for using the SD-MovieStage.
1Select [Programs] >> [Panasonic] >> [SD-MovieStage]
>> [SD-MovieStage] from the Windows start menu.
≥SD-MovieStage will start.
≥If you use Windows 98SE, install Panasonic Media Manager (supplied
accessory) before using the SD-MovieStage.
Others

Notes & Precautions

ªCharge the built-in battery for maintaining the date
information.
This built-in battery is used for the memory of date and time. If [0] is
displayed when the power is on, the built-in battery may be exhausted.
Charge using the following procedure:
1Take the battery out and plug in the AC adapter (l6).
2Turn the power off and leave this SD Multi AV Device as
it is for about 12 hours.
ªAfter Use.
1Turn off the SD Multi AV Device.
2Take out the Card.
3Detach the power supply and retract the LCD Monitor.
4Put the SD Multi AV Device into the Carrying Case.
10
8
9
DC IN 4.8V