8
1Install the battery or plug in the AC adaptor. (l6)
2Hold down the [ ] button for two seconds or more.
≥The SD Multi AV Device is turned on.
≥The message [PLEASE WAIT] is displayed for a while and then the
mode selection screen will be displayed.
≥
≥If the device is not used for 10 minutes or longer , the power is
automatically turned off. Press the power button again to turn it
back on.
ªTurning the Power OFF
While the Power is on, hold down the [ ] button for two seconds
or more.
Selecting Operation ModesSelect a desired mode on the mode selection screen.
1Press the [MODE] Button.
≥The mode selection screen 1 appears.
≥The mode selection screen also appears when the power is
turned on.
2Press the [MODE] Button to select [REC] or [PLAY].
≥Alternates between [REC] and [PLAY] by a push.
3Move the Jog Lever up or down to select a desired
mode.
4Press down the centre of the Jog Lever 2.
≥The mode selection screen disappears, and the selected mode is
now set.
ªAbout the Operation Mode
Seven operation modes are provided as follows.
≥Moving picture (MPEG4 format) record mode [REC>>MPEG4]
≥Moving picture (MPEG4 format) play mode [PLAY>>MPEG4]
≥Still picture (JPEG format still picture) record mode [REC>>PICTURE]
≥Still picture (JPEG format still picture) play mode [PLAY>>PICTURE]
≥Sound (VOICE format) record mode [REC>>VOICE]
≥Sound (VOICE format) play mode [PLAY>>VOICE]
≥Music (MPEG2-AAC music/ MP3 format) play mode [PLAY>>MUSIC]
/
MENU
2
MODE/
VOL
VOL
+
-
RECPLAY
PUSH/SET
SELECT
MPEG4
PICTURE
VOICE
1
1,2
3,4
2