32
8) Displayed by the text
[LOW BATTERY]:
The battery may be exhausted. Replace it with fully
charged battery.
[NO CARD]:
The Memory Card is not inserted. Otherwise, the Card
may not be inserted correctly.
[CARD FULL]:
The memory capacity is fully utilized. Erase any
unneccessaly files or replace it with a new card.
[CARD LOCKED]:
The write enable switch of the SD Memory Card is set to
[LOCK] (see page 24).
[CHECK CARD]:
Re-insert the Card. If [CHECK CARD] is still displayed,
the Card is not compatible or applicable. This SD Multi AV
Device cannot recognize it. Format it (l26).
[FILE LOCKED]
You attempt to execute the erase operation on a locked
Card.
[UNPLAYABLE CARD]
This data is not valid for playback.
[PLEASE RE-OPERATE]:
Press the power button for 5 seconds or longer if playback
or recording cannot be controlled or the screen freezes. If
the power remains, remove the battery off or unplug the
power cord.
ªCautions for Use
When you use your SD Multi AV Device on a rainy or
snowy day or on a beach, make sure that no water or
moisture enters the SD Multi AV Device.
≥Water may cause the SD Multi AV Device or card to
malfunction. (Irreparable damage may occur.)
≥If sea water splashes onto the SD Multi AV Device, wet a
soft cloth with tap water, wring it well, and use it to wipe
the camera body carefully. Then, wipe it again
thoroughly with a soft dry cloth.
Keep the SD Multi AV Device away from magnetized
equipment (such as a microwave oven, TV, video
game equipment, etc.).
≥If you use the SD Multi AV Device on or near a TV,
images or sounds may be disturbed due to
electromagnetic wave radiation.
≥Do not use near a cell phone because doing so may
cause noise to adversely affect the picture and sound.
≥Recording on the card may be damaged, or images may
be distorted by strong magnetic fields created by
speakers or large motors.
≥Electromagnetic wave radiation generated by a
microprocessor may adversely affect the SD Multi AV
Device, causing the disturbance of images and sounds.
≥If the SD Multi AV Device is affected by magnetically
charged equipment and does not function properly, turn
off the SD Multi AV Device power and detach the Battery
or AC Adaptor and then connect the Battery or AC
Adaptor again. Thereafter, turn on the SD Multi AV
Device power.
Do not use your SD Multi AV Device near radio
transmitters or high-voltage lines.
≥If you record pictures near radio transmitters or
high-voltage lines, recorded images or sounds may be
adversely affected.
Do not use this SD Multi AV Device for surveillance
purposes or other business use.
≥If you use the SD Multi AV Device for a long period of
time, the internal temperature increases and,
consequently, this may cause malfunction.
≥This SD Multi AV Device is not intended for business
use.
When you use your SD Multi AV Device on a beach or
similar place, do not let sand or fine dust get into the
SD Multi AV Device.
≥Sand or dust may damage the SD Multi AV Device.
(Extra care should be taken when inserting and
removing the Card.)
Do not spray insecticides or volatile chemicals onto
the SD Multi AV Device.
≥If the SD Multi AV Device is sprayed with such
chemicals, the camera body may be deformed and the
surface finish may peel off.
≥Do not keep rubber or plastic product in contact with the
SD Multi AV Device for a long period of time.