Before Operating This Set
Antenna cover removal and fitting
TX-17LA1, TC-17LA1
TX-20LA1, TC-20LA1
Removal
| 1. | Grasp the cover at the | |
|
| bottom end and initially | |
1 |
| remove by pulling slightly | |
| toward yourself. | ||
2 |
| ||
2. | Slowly pull out in the | ||
| |||
|
| downward direction. |
Removal
1 
2
1.Grasp the opening and initially pull the cover slightly towards yourself to disengage the claws (at 2 points on both the left and right).
2.Slowly pull out in the downward direction.
Fitting
1 
2
1.Insert the claws (at 4 points) at the top end.
2.Push it until click.
Fitting
1 
2
1.Insert the claws (at 4 points) at the top end.
2.Push it until click.
Cable cover removal and fitting
Removal | Fitting |
1 | 2 | 1. | Disengage the claws at the |
| |||
|
| uppermost end. | |
|
|
| |
|
| 2. | Slowly pull out in the upward |
|
|
| direction. |
Note:
1. Insert the claws (at 2 points) at
2 | the bottom. |
| |
| 2. Push it until click. |
1
Depending on the type of cable used it may not be possible to close the cover. In such cases the cable may be routed through the antenna cover.
6
