VIERA LinkTM “HDAVI ControlTM”
HDMI connections to some Panasonic equipment allow you to interface automatically. (p. 36)
This function may not work normally depending on the equipment condition.
The equipment can be operated by other remote controls with this function on even the TV is in Standby mode.
Image or sound may not be available for the first few seconds when playback starts.
Image or sound may not be available for the first few seconds when input mode is switched.
Volume function will be displayed when adjusting the volume of the equipment.
If you connect equipment that has “HDAVI Control 2 or later” function to the TV with an HDMI cable, the sound from the DIGITAL AUDIO OUT terminal can be output as
“HDAVI Control 5” is the newest standard (current as of December, 2009) for the HDAVI Control compatible equipment. This standard is compatible with the conventional HDAVI equipment.
HDMI connection
HDMI
HDMI is the world’s first complete digital consumer AV interface complying with a
If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable (*2).
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal.
Audio settings can be made on the “HDMI 1 in”, “HDMI 2 in” or “HDMI 3 in” menu screen. (p. 34) Applicable audio signal sampling frequencies (L.PCM): 48 kHz, 44.1 kHz, 32 kHz
(*1): The HDMI logo is displayed on an
Caution
Use with a PC is not assumed.
All signals are reformatted before being displayed on the screen.
If the connected device has an aspect adjustment function, set the aspect ratio to “16:9”.
These HDMI connectors are “type A”.
These HDMI connectors are compatible with HDCP
A device having no digital output terminal may be connected to the input terminal of either “COMPONENT”, or “VIDEO” to receive analog signals.
The HDMI input terminal can be used with only the following image signals: 480i, 480p, 720p, 1080i and 1080p. Match the output setting of the digital device.
For details of the applicable HDMI signals, see p. 59.
| Picture mode |
Vivid: | Provides enhanced picture contrast and sharpness for viewing in a |
Standard: | Recommended for normal viewing conditions with subdued room lighting. |
THX: | Faithfully reproduces the image quality that the movie makers intended in order to provide the |
| ultimate cinematic experience at home. |
Game: | For playing video games. This mode will be set automatically if “GAME” is selected from the Input label setting (p. 51) |
Custom (Photo): Customizes each item according to your taste.
Photo is displayed in JPEG menu.
Note
Picture mode will be automatically set to “Standard” if you change the Input label from “GAME” to other labels.
Picture mode will be automatically set to “Game” if you change from an Input label other than “GAME” to “GAME” label.
Pro settings
Reset to defaults:Resets all Pro setting adjustments to factory default settings. (Set/No)
W/B high R: | Adjusts the White Balance for light red areas. |
W/B high B: | Adjusts the White Balance for light blue areas. |
W/B low R: | Adjusts the White Balance for dark red areas. |
W/B low B: | Adjusts the White Balance for dark blue areas. |
Black extension: | Adjusts the dark shades of the image in gradation. |
Gamma adjustment: Gamma correction. Adjusts the intermediate brightness of the image.
Panel brightness:Selects the display panel brightness. (High/Mid/Low)
Contour emphasis: Adjusts the contour emphasis of the image.
AGC:Increases the brightness of dark signal automatically. (On/Off)
Save as default: Save all “Picture” (when “Picture mode” is “Custom”) and “Pro settings” adjustments.
Technical Information
FAQs, etc.
57
