Panasonic TC-P42G25, TC-P46G25, TC-P50G25, TC-P54G25 Configure Network settings, Error screen

First Time Setup (Continued)

Configure Network settings
Select the Network type		Set later:	Go to 6
Network settings	Step 5 of 6
Ethernet cable	Wireless (WiFi) Set later		You can set in “Setup” menu later.
		Wireless (WiFi): Start “Wireless network” (p. 17)
	LAN

	OK	Selects Ethernet cable or wireless network. If
Select		you select “set later” and want to repeat the
	RETURN	Network settings, select “Network settings” in
		the Setup Menu.

Select the setting mode

Network settings				Step 5 of 6
	Automatic
			Manual
	OK	Checks for proper network connection,
Select		settings and communication to the Internet
	RETURN	and server automatically.

Automatic

Automatic: Press OK to start setup automatically. Error screen is displayed when Network connection has failed.

Manual: Go to Manual setting.

Manual

Start connection test

Network settings		Step 5 of 6
	Connection test
	Check Ethernet cable connection
	Validate IP address
	Check for IP address duplication
	Check connection to the Internet
	Check communication with Viera CAST server.
	Test in progress...
Select
Change	RETURN

Connection test

Connection error

Manual setting

Network settings			Step 5 of 6
	IP setting mode	Automatic
	IP address	192.168.0.4
	Subnet mask	255.255.255.0
	Default gateway	192.168.0.1
	DNS setting mode	Automatic
	Primary DNS	192.168.0.1
	Secondary DNS	221.184.25.249
	Proxy address
	Proxy port
	Connect test
	Mac address	00-00-aa-cc-33-ab

Select

Change RETURN

Complete “Network settings”

Helpful information is displayed when you successfully complete “Network settings”.

Network settings

Network settings are complete. You can use VIERA CAST.

VIERA CAST lets you enjoy Internet contents on your VIERA TV.

OK Press OK to exit.

RETURN

			Manual
	Error screen
Network settings						Step 5 of 6
		Connection test
		Check Ethernet cable connection
		Validate IP address
		Check for IP address duplication
		Check connection to the Internet
		Check communication with Viera CAST server.
		Connection to local network (router) failed.
		Ensure wireless network availability
		Retry		Manual	Set later
		OK		Try again?
Select				Checks for proper network connection,
		RETURN		settings and communication to the Internet
				and server.

Press to return to the previous screen

Retry: Go to “Start connection test”

Set later: Go to

About wireless LAN

Wireless LAN adapter and Access point need to be obtained separately.

For the latest information on applicable LAN adapters, check the following website: http://panasonic.jp/support/global/cs/tv/

Check that the Access point supports WPS*.

(If it does not support WPS, the encryption key of the Access point is required when configuring settings.) Follow the instructions on the Access point setup screen and configure the appropriate security settings.

For more details on setting of Access point, please refer to operating manual for the Access point. We recommend using 11n (5 GHz) for the wireless system between the wireless

LAN adapter and Access point.

Communication is also possible with 11a, 11b, and 11g (2.4 GHz), but the communication speed may be slower.

If the wireless system of the Access point is changed, devices that could connect by wireless LAN may no longer be able to connect.

When VIERA CAST, Network camera, or other device is using the network, do not disconnect the wireless LAN adapter.

Keep the TV away from the following devices as much as possible:

Wireless LAN, Microwaves, and other devices that use 2.4 GHz and 5 GHz signals. Otherwise, the TV failures such as malfunction may occur due to the radio wave interference.

* WPS: Wi-Fi Protected Setup

16