Panasonic TC-P50G10 Network Camera, Start up Network camera, Basic operation for Network camera

Network Camera

You can operate the Network camera from TV’s remote and also check the images from Network camera on your TV

Basic operation for Network camera

Preparations

Internet connections (p. 29)

Example of Network Camera connection (p. 31)

Network setting (p. 44)

Before connecting the Network camera to TV, please complete the “IP setting” and run “Connection test”(p. 44)

Note

■Press to exit from a menu screen

■Press to return to the previous screen

This feature is only available with Panasonic-made network cameras released after summer 2009. (Preliminary model numbers: BL-C210A and BL-C230A) A number of VIERA-compatible network cameras can be founded at the following sites: http://www.panasonic.com/ http://panasonic.net/pcc/products/netwkcam/

With all connected equipment turned on

Start up Network camera

If there is no registered camera displayed, please set it in “Network Camera” settings. (p. 31)

Select “Network Camera” in “VIERA Link”

Using VIERA TOOLS		select
(p. 21)	Record now
	Stop recording	ok
	VIERA Link control
	Network Camera
	Speaker output
	TV

There is also an option to start with sensor detection.

View

Multi screen (Still image) Without Default camera (Default camera setting (p. 31))

4 split screen	9 split screen
Multi screen	Multi screen
(1/4)	(1/9)
Camera name	Camera name
Camera 1	Camera 1
Model	Model
BL-C210A	BL-C210A
Select OK	Select OK 1 - 9
RETURN	RETURN
R 4 cam / 8 cam	R 4 cam / 8 cam

select

ok

Single screen With Default camera (Default camera setting (p.32))

Single screen

Camera name

Camera 1

Model

BL-C210A

Pan

Tilt RETURN

1 - 9 Preset position

0Home position

For more details on setting and operation of the Network camera, please also read the operating manuals for the Network camera.

30