Panasonic TC-P46G10 Continued, Advanced, How to Use Menu Functions picture, sound quality, etc

(Continued)

Adjustments/Configurations (alternatives)

Sets the mode to select the channel with Channel up/down button
	Channel surf mode
(All/Favorite/Digital only/Analog only)
• Favorite: Only channels registered as FAVORITE (p. 20)	All
Selects the screen menu language (p. 16)	Language
Adjusts the clock (p. 18)
	Clock
Sets channels (p. 50)
	ANT/Cable setup
Selects the terminal and label of the external equipment (p. 53)
[Component 1/Component 2/HDMI 1/HDMI 2/HDMI 3/Video 1/Video 2]
To prevent howling, stops output of audio specified in this menu. (p. 53) (On/Off)
Prevents “Image retention” with Wobbling. (Automatic/Periodic)
• Automatic: Shifts the display image automatically.
• Periodic: Shifts the display image every (1/2/3/4) minutes according to what was set in the “Time (minutes)” menu.	Pixel orbiter	Automatic
Sets the time for “Pixel orbiter-Periodic” setting. (1/2/3/4)	Time (minutes)	4
Change the brightness of the side bar (Off/Dark/Mid/Bright) (4:3 mode only)
• The recommended setting is “Bright” to prevent panel “Image retention”. (p. 60)	4:3 side bars	Bright
Press “OK” to start “Scrolling” on the screen (p. 60)	Scrolling bar
Controls equipment connected to HDMI terminals (p. 40) (On/Off)
• “Power off link”, “Power on link”, “Stand-by power save”, “Auto power stand-by” and “Default speakers” cannot be selected if “Off” is set.	VIERA Link	On
Sets “Power on link” of HDMI connection equipment (p. 40) (Yes/No)	Power on link	Yes
Sets “Power off link” of HDMI connection equipment (p. 40) (Yes/No)
	Power off link	Yes
Set “Stand-by power save” of HDMI connection equipment. (p. 40) (No/Yes)	Stand-by power save
	No
Set “Auto power stand-by” of HDMI connection equipment. (p. 40)
	Auto power stand-by
(No/Yes (with reminder)/Yes (no reminder)
	No
Selects the default speakers (p. 40) (TV/Theater)
	Default speakers	TV
Sets Network setting (p. 44)
	Network setting
Sets VIERA CAST setting (p. 46)
	VIERA CAST setting
Set Network Camera status. (Search/Registration/Connection/Deleting/Default setting etc.) (p. 30)
	Network cameras list
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION is performed
for more than 10 minutes. (Enable/Disable)
Note
	No signal for 10 minutes
• Not in use when setting “Auto power on”, “On/Off Timer”, “Lock”, “SD mode” or Digital channel.
	Enable
• “No signal for 10 minutes was activated” will be displayed for about 10 seconds when the TV is turned

•The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off. To conserve energy, the TV automatically turns off when no operation of remote or side panel key continues for more than 3 hours. (Enable/Disable)on for the first time after turning the power off by “No signal for 10 minutes”.

Note
	No activity for 3 hours
• Not in use when setting “Auto power on”, “On/Off Timer” or PC input display.
	Disable
• “No activity for 3 hours was activated” will be displayed for about 10 seconds when the TV is turned on

•The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off. Turns TV On automatically when the cable box or a connected device is turned On. (No/Yes)for the first time after turning the power off by “No activity for 3 hours”.

TV AC cord must be plugged into this device. TV comes on every time the power is restored.	Auto power on	No
• The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto power on” is set. (p. 54)
Set “Movie”, “Thumbnail” or “Slideshow” to play back SD cards automatically.	Play SD card automatically
(Slideshow/Thumbnail/Movie/Set later/Off)
	Set later
Displays TV version and software license.
	About
Performing Reset will clear all items set with Setup, such as channel settings. (p. 50)
	Reset to defaults

How to Use Menu Functions (picture, sound quality, etc.)

Advanced

Adjustments/Configurations (alternatives)

Sets the mode to select the channel with Channel up/down button (All/Favorite/Digital only/Analog only)

Sets favorite channels. (p. 20)

Changes the station identifier. (p. 51)

Checks the signal strength if interference or freezing occurs on a digital image. (p. 51) 37