base station before you can use the handset.
3.2.1Install battery
Warning
Always use AAA rechargeable batteries supplied with your unit. If alkaline batteries are used instead of rechargeable batteries, “WARNING BATT” will show on the display and the battery icon will blink quickly.
1 Slide out the battery cover.
2Place the batteries in the correct polarity as indicated and replace the cover.
3.2.2Charge battery
Warning
The handset must be charged for at least 24 hours before using it for the first time. When the battery level becomes low, the low battery sensor alerts you by
sounding an audible tone and blinking the battery icon. If the battery level becomes exceedingly low, the phone automatically switches off shortly after the alert and any function in progress will not be saved.
1Place the handset on the charging cradle of the base station. A beep is emitted if the handset is placed
correctly.
2The battery icon 
on the display blinks during charge.
3The battery icon 
becomes steady when the handset is fully
charged.
Note
Optimal battery life is reached after 3 cycles of complete charging (over 15 hours) and discharging, allowing approximately 12 hours of
The indoor and outdoor range of the phone is up to 50 metres and 300 metres respectively. When the handset moves beyond the operation range, the antenna icon 
will blink.
Tip
When you reach the range limit the conversation may become crackly. Move closer to the base.
3.3Welcome mode
Before you first use your handset, you need to configure it according to the country of use. After charging it for a few minutes, the word WELCOME appears in various languages. Follow these steps to configure your phone:
12 | Getting started |
