1 Important

Take time to read this user manual before you use your phone. It contains important information and notes regarding your phone.

1.1Power requirements

This product requires an electrical supply of 100-240 volts AC. In case of power failure, communication can be lost.

The Electrical network is classified as hazardous. The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible.

The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard

EN 60-950.

Warning

To avoid damage or malfunction:

Do not allow the charging contacts or the battery to come into contact with metal objects.

Never use any other battery than the one delivered with the product or recommended by Philips: risk of explosion.

Always use the cables provided with the product.

Handsfree activation could suddenly increase the volume in the earpiece to

a very high level: make sure the handset is not too close to your ear.

This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls.

Do not expose the phone to excessive heat caused by heating equipment or direct sunlight.

Do not drop your phone or allow objects to fall on your phone.

Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives as these may harm the set.

Do not use the product in places where there are explosive hazards.

Do not let small metal objects come into contact with the product. This can deteriorate audio quality and damage the product.

Active mobile phones in the vicinity may cause interference.

Do not open your product as you could be exposed to high voltages.

Do not allow the charger to come into contact with liquids.

Use only with provided batteries.

Rechargeable batteries information Ni-MH battery, AAA × 2, 1.2V, 600mAh

Use only with provided power supply.

Power supply information for base station

Input: AC100-240V/0.3A, 50Hz/60Hz

Output: DC6V/0.5A JOD-SWR-07342

JODEN

Impor tant

3

Page 5
Image 5
Philips SE255, UCZZ01930AB manual Power requirements, Joden