4.1.7Call using Direct Access Memory
In idle mode, long press 1 or 2 to dial a stored direct access memory number.
Note
See section 5.5.6 for instructions on how to store, edit, and delete direct access memory numbers.
4.1.8 Enter a Dialing Pause
Make a long press # after entering one or more digits to enter a pause in the dialling sequence.
4.2Answer a call
Danger
When the handset rings during an incoming call, please do not hold the handset too close to your ear as the volume of the ringing tone may damage
your hearing.
When the phone rings, press t.
• The call is established.
Note
Incoming call has priority over other events. Whenever there is an incoming call, other status in progress such as phone setting, menu navigation, etc will be aborted.
4.2.1Handsfree answering
Danger
Handsfree activation can suddenly increase the volume in the earpiece to a
very high level. Make sure the handset is not too close to your ear.
When the phone rings, press l.
• The handset loudspeaker is activated.
4.2.2 Call waiting
If you have subscribed to Call Waiting services, the earpiece will emit a beep tone to inform you that there is a second incoming call. The number or name of the second caller will also be displayed if you have subscribed to Caller Line Identification service (CLI). Please contact your network provider for more information on this service.
To answer the second call, press t and then 2 to answer the call.
• The first call is put on hold, and you are now connected to the second call.
OR
Press t and then 1 to end the current call and answer the second call.
4.3End a call
To end a conversation, press h.
•The call ends.
Tip
When auto
activated by default.
Note
The call duration
18 | Using your phone |
