7.5Reset Unit
You can reset your phone to its default settings with this feature.
Warning
Upon reset, all your personal settings, call log and redial list entries will be deleted and the phone will return to its default settings. However, your phonebook as well as the unread messages of your answering machine will remain unchanged after reset.
Note
You may have to configure your phone once again. In this case the WELCOME mode will appear again after reset. (Go to chapter 3.3)
1Press m in idle mode, scroll n to
ADVANCED SET and press o, scroll n to RESET and press o.
2CONFIRM? is displayed on the screen.
3Press o again to confirm.
•A validation tone is emitted.
•The unit is reset to its default settings. (See “Default settings” on page 32)
1Press m in idle mode, scroll n to ADVANCED SET and press o, scroll n to AUTO PREFIX and press o.
2DETECT DIGIT is displayed on
the screen. Press o to enter.
•The last stored detect string is displayed (if any).
3Enter a detect string number
(maximum 5 digits) and press o to confirm.
4PREFIX is displayed on the screen. Press o to enter.
•The last stored prefix number is displayed (if any).
5Enter the prefix number (maximum 10 digits) and press o to confirm.
•SAVED is displayed and the screen returns to idle screen.
Note
If no detect string (blank) is entered, the prefix number will be automatically added to the predial number after t is pressed.
For numbers starting with *, # or P, the prefix number will not be added to the predial number after t is pressed.
7.6Set Prefix
This feature allows you to define a prefix number to be added to the beginning of a number during predialling (see “Predialling” on page 17). You may also use this feature to add a detect string to match and replace the first few digits of the number during predialling.
You can enter up to a maximum of 5 digits for the detect string and 10 digits for the auto prefix number.
7.7Change Recall time
Recall time (or dial delay) is the time delay by which the line will be disconnected after you press t key. It can be set to short or long.
The default value of recall time that is preset in your handset should be the best suited for your country network and therefore you should not need to change it.
Advanced settings | 31 |
