•Power supply information for charger (multihandset pack only)
Input:
Output: DC6V/0.21A
JODEN
•Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
About operating and storage temperatures:
•Operate in a place where temperature is always between 0 and 35ºC (32 to 95ºF).
•Store in a place where temperature is always between
•Battery life may be shortened in low temperature conditions.
1.2Conformity
We, Philips, declare that the product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This product can only be connected to the analogue telephone networks of the countries mentioned on the packaging. You can find the Declaration of Conformity on www.p4c.philips.com.
1.3Using GAP standard compliance
The GAP standard guarantees that all DECT™ GAP handsets and base stations comply with a minimum operating
standard irrespective of their make. Your handset and base station are GAP compliant, which means the minimum guaranteed functions are: register a handset, take the line, receive a call and dial. The advanced features may not be available if you use a handset other than the handset of one of the model described in this manual with your base station.
To register and use your phone’s handset with a GAP standard base station of a different make, first follow the procedure described in the manufacturer’s instructions, then follow the procedure described on page 29. To register a handset of another make to your phone’s base station, place the base station into registration mode (page 29), then follow the procedure in the manufacturer’s instructions.
1.4Recycling & disposal Disposal instructions for old products.
The WEEE directive (Waste Electrical and Electronic Equipment; 2002/96/EC) has been put in place to ensure that products are recycled using best available treatment, recovery and recycling techniques to ensure human health and high environmental protection.
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
4 | Important |
