Panasonic TC-P50G10 Displaying PC Screen on TV, Viewing, Menu, Adjustments/Configurations options

■PC menu setting (change as desired)

Making settings “How to Use Menu Functions” to (p. 34)

Menu		Item			Adjustments/Configurations (options)
			Reset to	Resets PC adjust
			defaults
			Sync	H & V:	The H and V sync signals are input from the HD/VD connector. (p. 61)
				On green: Uses a synchronized signal on the Video G signal, which is input from the G
					connector. (p. 61)
			Dot clock	Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is
				blurred.
			H-position	Adjusts the horizontal position.
Picture	PC		V-position	Adjusts the vertical position.
	adjustments
				Alleviates the problem if the whole picture appears to flicker or is blurred.
				First adjust the Dot Clock to get the best possible picture, then adjust the
			Clock phase	Clock Phase so that a clear picture appears.

Note

It may not be possible to display a clear picture due to poor input signals.

Input	Switches to wide display.
	Input signal switched from 640×480 to 852×480
resolution
	Input signal switched from 1024×768 to 1280×768 or 1366×768
	Displays the H (Horizontal)/V (Vertical) frequencies.
H-frequency	Display range
V-frequency	Horizontal:15	- 110 kHz
	Vertical: 48	- 120 Hz

Audio menu (p. 34)

Viewing

Displaying PC Screen on TV

33