User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

 

 

Default

The name for VLAN ID 1 is always Default. The name for other VLANs is

 

defaulted to a blank string.

Format

config vlan name <name> <2-4094>

config vlan makestatic

This command changes a dynamically created VLAN (one that is created by GVRP registration) to a static VLAN (one that is permanently configured and defined). The ID is a valid VLAN identification number. VLAN range is 2-4094.

Format

config vlan makestatic <2-4094>

config vlan participation

This command configures the degree of participation for a specific interface in a VLAN. The ID is a valid VLAN identification number, and the interface is a valid interface number or all.

Format

config vlan participation <excludeincludeauto> <1-

 

4094> <slot.portall>

Participation options are:

include

The interface is always a member of this VLAN. This is equivalent to

 

registration fixed.

exclude

The interface is never a member of this VLAN. This is equivalent to registration

 

forbidden.

auto

The interface is dynamically registered in this VLAN by GVRP. The interface

 

will not participate in this VLAN unless a join request is received on this

 

interface. This is equivalent to registration normal.

config vlan port tagging

This command configures the tagging behavior for a specific interface in a VLAN. If tagging is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN identification number. The interface is a valid port number or all.

Format

config vlan port tagging <enabledisable> <1-4094>

 

<slot.portall>

Switching Commands

7-31

202-10010-01

Page 73
Image 73
NETGEAR 7200 Series Config vlan makestatic, Config vlan participation, Config vlan port tagging, Participation options are