User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

Format

config vlan port acceptframe <allvlan>

 

<slot.portall>

config vlan port ingressfilter

This command enables or disables ingress filtering. If ingress filtering is disabled, frames received with VLAN IDs that do not match the VLAN membership of the receiving interface are admitted and forwarded to ports that are members of that VLAN.

Default

disable

Format

config vlan port ingressfilter <enabledisable>

 

<slot.portall>

show protocol

This command displays the Protocol-Based VLAN information for either the entire system, or for the indicated Group.

Format

show protocol detailed <groupid/all>

Group Name

This field displays the group name of an entry in the Protocol-based VLAN

 

table.

Group ID

This field displays the group identifier of the protocol group.

Protocol(s)

This field indicates the type of protocol(s) for this group.

VLAN

This field indicates the VLAN associated with this Protocol Group.

Interface(s)

This field lists the Slot.Port interface(s) that are associated with this Protocol

 

Group.

config protocol create

This command adds protocol-based VLAN group to the system. The <groupName> is a character string of 1 to 16 characters. When it is created, the protocol group will be assigned a unique number that will be used to identify the group in subsequent commands.

Format

config protocol create <groupname>

config protocol delete

This command removes the protocol-based VLAN group that is identified by this <groupid>.

Formatconfig protocol delete <groupid>

Switching Commands

7-33

202-10010-01

Page 75
Image 75
NETGEAR 7200 Series Config vlan port ingressfilter, Show protocol, Config protocol create, Config protocol delete