User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

config lag adminmode

This command enables or disables a LAG. The interface is a logical slot and port for a configured LAG. The option all sets every configured LAG with the same administrative mode setting.

Format

config lag adminmode <logical slot.portall>

 

<enabledisable>

config lag linktrap

This command enables or disables link trap notifications for the LAG. The interface is a logical slot and port for a configured LAG. The option all sets every configured LAG with the same administrative mode setting.

Default

enable

Format

config lag linktrap <logical slot.portall>

 

<enabledisable>

config lag name

This command defines a name for the LAG. The interface is a logical slot and port for a configured LAG, and name is an alphanumeric string up to 15 characters. This command is used to modify the name that was associated with the LAG when it was created.

Format

config lag name <logical slot.portall> <name>

config lag deletelag

This command deletes an existing lag from the configuration. The interface is a logical slot and port for a configured LAG. The all option removes all configured LAGs.

Format

config lags deletelag <logical slot.portall>

config lag stpmode

This command sets the STP mode for a specific LAG. This is the value specified for STP Mode on the Port Configuration Menu. 802.1D mode is the default. The interface is a logical slot and port for a configured LAG. The all option sets all configured LAGs with the same option.

Format

config lag stpmode <logical slot.portall>

 

<off802.1dfast>

7-28

Switching Commands

202-10010-01

Page 70
Image 70
NETGEAR 7200 Series Config lag adminmode, Config lag linktrap, Config lag name, Config lag deletelag, Config lag stpmode