
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
•Show commands display spanning tree settings, statistics, and other information.
•Config commands configure features and options of the switch. For every config command there is a show command that displays the config setting.
This section is organized by configuration type:
•System information and statistics commands
•Bridge and CIST commands
•MSTI commands
•Modified commands
•Obsolete commands
show spanningtree summary
This command displays spanning tree settings and parameters for the switch.
Format | show spanningtree summary |
Spanning Tree Adminmode | Enabled or disabled. |
Spanning Tree Version | Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w, or IEEE |
| 802.1d) based upon the Force Protocol Version parameter. |
Configuration Name | TConfigured name. |
Configuration Revision |
|
Level | Configured value. |
Configuration Digest Key | Calculated value. |
Configuration Format |
|
Selector | Configured value. |
MST Instances | List of all multiple spanning tree instances configured on the switch. |
config spanningtree adminmode
This command sets the spanningtree operational mode. While disabled, the spanningtree configuration is retained and can be changed, but it is not activated.
Default | disable |
Format | config spaningtree adminmode <enable/disable> |
Switching Commands |