
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
show radius stats
This command displays the RADIUS statistics that are not related to a specific server or to the accounting server.
Format | show radius stats |
Invalid Server Addresses | The number of RADIUS |
| addresses. |
clear radius stats
This command clears all RADIUS statistics.
Format | clear radius stats |
config dot1x adminmode
This command enables or disables authentication support on the switch. The default value is disable. While disabled, the dot1x configuration is retained and can be changed, but it is not activated.
Default | disable |
Format | config dot1x adminmode <enable/disable> |
config dot1x port initialize
This command begins the initialization sequence on the specified port. This command is only valid if dot1x is enabled and the control mode for the specified port is ‘auto’.
Format | config dot1x port initialize <slot.port> |
config dot1x port reauthenticate
This command begins the reauthentication sequence on the specified port. This command is only valid if dot1x is enabled and the control mode for the specified port is ‘auto’.
Format | config dot1x port reauthenticate <slot.port> |
Switching Commands |