User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Default | None |
Format | config authentication login create <listname> |
config authentication login delete
This command deletes the specified authentication login list. The attempt to delete will fail if any of the following conditions are true:
•The login list name is invalid or does not match an existing authentication login list
•The specified authentication login list is assigned to any user or to the nonconfigured user for any component
•The login list is the default login list included with the default configuration and was not created using ‘config authentication login create’. The default login list cannot be deleted.
Format | config authentication login delete <listname> |
config authentication login set
This command sets an ordered list of methods in the authentication login list. The maximum number of authentication login methods is three. The possible method values are local, radius, and reject.
The value of local indicates that the user’s locally stored ID and password are used for authentication. The value of radius indicates that the user’s ID and password will be authenticated using the RADIUS server. The value of reject indicates that the user is never authenticated.
To authenticate a user, the authentication methods in the user’s login will be attempted in order until an authentication attempt succeeds or fails.
Note that the default login list included with the default configuration can not be changed.
Default | None |
Format | config authentication login set <listname> <local/ |
| radius/reject> [local/radius/reject] [local/radius/ |
| reject] |
Switching Commands |
