User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
config radius server primary
This command specifies which configured server should be the primary server for this RADIUS client. The primary is the server that is used by default for handling RADIUS requests. The remaining configured servers are used only if the primary server cannot be reached. A maximum of three servers can be configured on each client. Only one server can be configured as the primary server. If a primary server is currently configured and this command is issued, the server specified by the IP address used in this command will become the new primary server. The IP address specified must match that of a configured server.
Format | config radius server primary <ipaddr> |
config radius server msgauth
This command enables or disables the message authenticator attribute for the specified RADIUS server. Enabling the message authenticator attribute provides additional security in the connection between the RADIUS client and the RADIUS server. Some RADIUS servers require enabling the message authenticator attribute for authentication requests from the RADIUS client to be accepted. The IP address specified must match that of a configured server.
Format | config radius server msgauth <ipaddr> <enable/disable> |
show radius summary
This command displays the following RADIUS configuration items for the switch.
Format | show radius summary |
Current Server IP address The IP address of the server currently used for authentication. | |
Number of Configured |
|
Servers | The number of RADIUS servers that have been configured. This value will be in |
| the range of 0 and 3. |
Max Number of Retransmits The configured value of the maximum number of times a request packet is
| retransmitted. |
Timeout Duration | The configured timeout value, in seconds, for request retransmissions. |
Accounting Mode | The configured value for RADIUS accounting mode indicating if accounting is |
| currently enabled. |
show radius server summary
This command displays the configured RADIUS servers.
Format | show radius server summary |
|
|
Switching Commands |
