User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Total Errors - the sum of Single, Multiple, and Excessive Collisions. FCS Errors - the total number of packets transmitted that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad Frame Check Sequence (FCS) with an integral number of octets
Oversized - the total number of frames that exceeded the max permitted frame size. This counter has a max increment rate of 815 counts per sec. at 10 Mb/s. Underrun Errors - the total number of frames discarded because the transmit FIFO buffer became empty during frame transmission.
Transmit Discards
Total Discards - the sum of single collision frames discarded, multiple collision frames discarded, and excessive frames discarded.
Single Collision Frames - a count of the number of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision.
Multiple Collision Frames - a count of the number of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision.
Excessive Collisions - a count of frames for which transmission on a particular interface fails due to excessive collisions.
Port Membership - the number of frames discarded on egress for this port due to egress filtering being enabled.
VLAN Viable Discards - the number of frames discarded on this port when a lookup on a particular VLAN occurs while that entry in the VLAN table is being modified, or if the VLAN has not been configured.
Protocol Statistics
BPDU's received - the count of BPDU's (Bridge Protocol Data Units) received in the spanning tree layer.
BPDU's Transmitted - the count of BPDU's (Bridge Protocol Data Units) transmitted from the spanning tree layer.
802.3x Pause Frames Received - a count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in
GVRP PDU's Received - the count of GVRP PDU's received in the GARP layer.
GVRP PDU's Transmitted - the count of GVRP PDU's transmitted from the GARP layer.
GVRP Failed Registrations - the number of times attempted GVRP registrations could not be completed.
GMRP PDU's received - the count of GMRP PDU's received in the GARP layer.
GMRP PDU's Transmitted - the count of GMRP PDU's transmitted from the GARP layer.
GMRP Failed Registrations - the number of times attempted GMRP registrations could not be completed.
Switching Commands |
