User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Current | Indicates the configured server currently in use for authentication. |
IP address | The configured IP address of the authentication server. |
Port | The port in use by this server. |
Type | Primary or Secondary. |
Secret Configured | Yes or No. |
show radius server stats
This command displays the statistics for a configured RADIUS server. The IP address specified must match the IP address of a configured RADIUS server.
Format | show radius server stats <ipaddr> |
Server IP address |
|
Round Trip Time | The time interval, in seconds, between the most recent |
| Challenge and the |
| authentication server. |
Access Requests | The number of RADIUS |
| number does not include retransmissions. |
Access Retransmissions | The number of RADIUS |
| authentication server. |
Access Accepts | The number of RADIUS |
| invalid packets, that were received from this server. |
Access Rejects | The number of RADIUS |
| invalid packets, that were received from this server. |
Access Challenges | The number of RADIUS |
| invalid packets, that were received from this server. |
Malformed Access |
|
Responses | The number of malformed RADIUS |
| this server. Malformed packets include packets with an invalid length. Bad |
| authenticators or signature attributes or unknown types are not included as |
| malformed access responses. |
Bad Authenticators | The number of RADIUS |
| authenticators or signature attributes received from this server. |
Pending Requests | The number of RADIUS |
| have not yet timed out or received a response. |
Timeouts | The number of authentication timeouts to this server. |
Unknown Types | The number of RADIUS packets of unknown type which were received from |
| this server on the authentication port. |
Packets Dropped | The number of RADIUS packets received from this server on the authentication |
| port and dropped for some other reason. |
Switching Commands |