User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

config dot1x defaultlogin

This command assigns the authentication login list to use for nonconfigured users for 802.1x port security. This setting is overridden by the authentication login list assigned to a specific user if the user is configured locally. If this value is not configured, users will be authenticated using local authentication only.

Format

config dot1x defaultlogin <listname>

config dot1x login

This command assigns the specified authentication login list to the specified user for port security. The <user> must be a configured <user> and the <listname> must be a configured login list.

Format

config dot1x login <user> <listname>

config dot1x port users add

This command adds the specified user to the list of users with access to the specified port. The <user> must be a configured <user> and the <port> must be a valid port. By default, a user is given access to all ports.

Default

Access to all ports

Format

config dot1x port users add <user> <slot.port/all>

config dot1x port users remove

This command removes the specified user from the list of users with access to the specified port.

Format

config dot1x port users remove <user> <slot.port/all>

config users defaultlogin

This command assigns the authentication login list to use for non-configured users when attempting to log in to the system. This setting is overridden by the authentication login list assigned to a specific user if the user is configured locally. If this value is not configured, users will be authenticated using local authentication only.

Format

config users defaultlogin <listname>

7-72

Switching Commands

202-10010-01

Page 114
Image 114
NETGEAR 7200 Series Config dot1x defaultlogin, Config dot1x login, Config dot1x port users add, Config users defaultlogin