User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

config spanningtree bridge maxage

This command sets the Bridge Max Age parameter to a new value for the common and internal spanning tree. The maxage <value> is in whole seconds within a range of 6 to 40, with the value being less than or equal to "2 times (Bridge Forward Delay - 1)".

Default

20

Format

config spanningtree bridge maxage <6-40>

config spanningtree bridge hellotime

This command sets the Hello Time parameter to a new value for the common and internal spanning tree. The hellotime <value> is in whole seconds within a range of 1 to 10 with the value being less than or equal to "(Bridge Max Age / 2) - 1".

Default

2

Format

config spanningtree bridge hellotime <1-10>

config spanningtree bridge forwarddelay

This command sets the Bridge Forward Delay parameter to a new value for the common and internal spanning tree. The forwarddelay <value> is in whole seconds within a range of 4 to 30, with the value being greater than or equal to "(Bridge Max Age / 2) + 1".

Default

15

Format

config spanningtree bridge forwarddelay <4-30>

config spanningtree bridge priority

This command sets the Bridge Priority parameter to a new value for the common and internal spanning tree. The bridge priority <value> is a number within a range of 0 to 61440. The twelve least significant bits will be masked according to the 802.1s specification. This will cause the priority to be rounded down to the next lower valid priority.

Default

32768

Format

config spanningtree bridge priority <0-61440>

show spanningtree cst detailed

This command displays spanning tree settings for the common and internal spanning tree.

Switching Commands

7-49

202-10010-01

Page 91
Image 91
NETGEAR 7200 Series user manual Config spanningtree bridge maxage, Config spanningtree bridge hellotime