User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
show vlan port
This command displays VLAN port information.
Format | show vlan port <slot.port> |
Slot.Port | Indicates by slot id and port number which port is controlled by the fields on this |
| line. It is possible to set the parameters for all ports by using the selectors on the |
| top line. |
Port VLAN ID | The VLAN ID that this port will assign to untagged frames or priority tagged |
| frames received on this port. The value must be for an existing VLAN. The |
| factory default is 1. |
Acceptable Frame Types | Specifies the types of frames that may be received on this port. The options are |
| 'VLAN only' and 'Admit All'. When set to 'VLAN only', untagged frames or |
| priority tagged frames received on this port are discarded. When set to 'Admit |
| All', untagged frames or priority tagged frames received on this port are |
| accepted and assigned the value of the Port VLAN ID for this port. With either |
| option, VLAN tagged frames are forwarded in accordance to the 802.1Q VLAN |
| specification. |
Ingress Filtering | May be enabled or disabled by selecting the corresponding line on the pull- |
| down entry field. When enabled, the frame is discarded if this port is not a |
| member of the VLAN with which this frame is associated. In a tagged frame, the |
| VLAN is identified by the VLAN ID in the tag. In an untagged frame, the |
| VLAN is the Port VLAN ID specified for the port that received this frame. |
| When disabled, all frames are forwarded in accordance with the 802.1Q VLAN |
| bridge specification. The factory default is disabled. |
GVRP |
|
config vlan port pvid
This command changes the VLAN ID per interface.
Default | 1 |
Format | config vlan port pvid |
config vlan port acceptframe
This command sets the frame acceptance mode per interface. For VLAN Only mode, untagged frames or priority frames received on this interface are discarded. For Admit All mode, untagged frames or priority frames received on this interface are accepted and assigned the value of the interface VLAN ID for this port. With either option, VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification. VLAN ID range is
Default | Admit All |
|
|
Switching Commands |
