User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
config mirroring delete
This command removes the port mirroring designation from both the probe port and the mirrored port and removes the probe port from all VLANs. The port must be manually
Format | config mirroring delete |
config mirroring mode
This command configures the Port Mirroring mode. The possible values are enable and disable. The default value is disable. The probe and mirrored ports must be configured before port mirroring can be enabled. If enabled, the probe port will mirror all traffic received and transmitted on the physical mirrored port. It is not necessary to disable port mirroring before modifying the probe and mirrored ports.
Default | disable |
Format | config mirroring mode <enabledisable> |
show macfilter
This command displays the Static MAC Filtering information for all Static MAC Filters. If <all> is selected, all the Static MAC Filters in the system are displayed. If a macaddr is entered, a vlan must also be entered and the Static MAC Filter information will be displayed only for that MAC address and VLAN.
Format | show macfilter <macaddr vlan/all> |
MAC Address | The MAC Address of the static MAC filter entry. |
VLAN ID | The VLAN ID of the static MAC filter entry. |
Source Port(s) | Indicates the source port filter set's slot and port(s). |
Destination Port(s) | Indicates the destination port filter set's slot and port(s). |
config macfilter create
This command adds a static MAC filter entry for the MAC address <macaddr> on the VLAN <vlan>. The <macaddr> parameter must be specified as a
The restricted MAC Addresses are: 00:00:00:00:00:00, 01:80:C2:00:00:00 to 01:80:C2:00:00:0F, 01:80:C2:00:00:20 to 01:80:C2:00:00:21, and FF:FF:FF:FF:FF:FF.
Switching Commands |
