
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Current | Determines the degree of participation of this port in this VLAN. The |
| permissible values are: |
| Include - this port is always a member of this VLAN. This is equivalent to |
| registration fixed in the IEEE 802.1Q standard. |
| Exclude - this port is never a member of this VLAN. This is equivalent to |
| registration forbidden in the IEEE 802.1Q standard. |
| Autodetect - Specifies to allow the port to be dynamically registered in this |
| VLAN via GVRP. The port will not participate in this VLAN unless a join |
| request is received on this port. This is equivalent to registration normal in the |
| IEEE 802.1Q standard. |
Configured | Determines the configured degree of participation of this port in this VLAN. |
| The permissible values are: |
| Include - this port is always a member of this VLAN. This is equivalent to |
| registration fixed in the IEEE 802.1Q standard. |
| Exclude - this port is never a member of this VLAN. This is equivalent to |
| registration forbidden in the IEEE 802.1Q standard. |
| Autodetect - specifies to allow the port to be dynamically registered in this |
| VLAN via GVRP. The port will not participate in this VLAN unless a join |
| request is received on this port. This is equivalent to registration normal in the |
| IEEE 802.1Q standard. |
Tagging | Select the tagging behavior for this port in this VLAN. |
| Tagged - specifies to transmit traffic for this VLAN as tagged frames. |
| Untagged - specifies to transmit traffic for this VLAN as untagged frames. |
config vlan create
This command creates a new VLAN and assigns it an ID. The ID is a valid VLAN identification number (ID 1 is reserved for the default VLAN) VLAN range is
Format | config vlan create |
config vlan delete
This command deletes an existing VLAN. The ID is a valid VLAN identification number (ID 1 is reserved for the default VLAN) VLAN range is
Format | config vlan delete |
config vlan name
This command changes the name of a VLAN. The name is an alphanumeric string of up to 16 characters, and the ID is a valid VLAN identification number. ID range is
Switching Commands |